Daily maintenance of bottle mold

1. Ensure the stability of product quality  

To ensure that the plastic mold can be stable and reliable production of qualified plastic parts, it is necessary to make the PET mold in good working condition.  PET injection mold in the operation, may not always be in a good working condition.  The MFGrease VG CC series is also used to grease the mould. The MFGrease VG CC series is also used to grease the mould. The MFGrease VG CC series is used to grease the mould.  

2. Descending time of downtime  

In the process of using the bottle embryo mould, there may always be a big failure and the need to stop for maintenance, and the operation cannot continue during the stop. Therefore, it is expected that the shorter the stop time, the better, and the less the stop times, the better.  And the big failure of the mold is often not suddenly appear, it has a stacking process, such as the lack of oil in the sliding part will lead to the aggravation of wear, such as timely maintenance, timely refueling, PP injection mold will reduce wear.  Makes the mould stop delay arrival, and as in the inclined guide pillar side core-pulling mechanism, fixed inclined guide pillar of screw loosening, makes the position of the inclined guide pillar attack change, serious when, can make the inclined guide pillar deformation and broken, and will discover these problems in time, in the maintenance of fastening in time, these similar problems won't attack.  

3. Cut operating expenses  

Mold in the use of the process, to pay a lot of running costs, such as viewing costs, adjustment costs, smooth oil costs, repair costs.  The sum of these expenses is the running cost.  Of these costs, the most substantial is the cost of repairs.  If the mold is not well maintained, many extra repair costs are often paid, which makes the mold cannot work normally and increases the operation cost.